Jeep TJ/YJ Standard Rear Bumper

SKU: 250.200.100
Weight: 70 lb
Dimensions: 59 in × 11 in × 7 in

87-06 Jeep Wrangler YJ, TJ & Unlimited.

Installation Time: 

1 - 2 Hours


1 Year Limited

Our TJ & YJ Rear Bumper is a perfect compliment to our Front Bumper system. Our bumper doesn’t just look great; it’s functional, easy to install and tough as nails.

It’s fabricated using USA Grade 3/16” Steel Plate, laser cut, CNC formed, robotically welded, and hand finished by craftsmen. The D-Ring mounts are 5/8” Thick Steel Plate and welded solid front and back so they can be used as recovery points.

Our rear bumper includes a gusseted 2” hitch receiver that is fully welded front and back for strength. We also include two frame tie-in brackets for added strength during recovery or pulling on the bumper (Frame tie-in brackets only fit 97-06 Models).

All bumpers receive a thorough zinc phosphate rinse and cleaning, E-Coated and then Powder Coated with a Lightly Textured Black finish.

This bumper is not rated by a third party for towing, however we do use an actual towing receiver tube that is manufactured by Curt Mfg. Co.  The receiver tube is 2" square with a reinforcement ring to prevent the tube from splitting over time.  The tube is also welded solid in the front of the bumper and boxed and welded on the backside, so it has an incredibly strong design.  We haven’t had any negative feedback from any customers over the 15+ years of manufacturing this design.

**Important** For oversized tires, please use Hyline P/N 300.200.100

Tools Required: 

Ratchet, 18mm socket, 5/8 socket, Torque wrench, 18mm wrench, 5/8 wrench, 11/16 wrench, hand drill, 7/16 drill bit and safety glasses.

Parts Included: 

Rear Bumper with 2 hitch receiver, TJ frame tie in brackets, Grade 8 hardware, 1/4 shims and 5/8 plate Ring mounts.