Jeep Bumpers

Looking to add a little more style and protection to your Summit Modular Front Stubby Bumper?  We’ve designed the Full Width bumper end caps to be bolted on at any time.  They are made with 3/16” steel and are connected to the bumper using four 5/16-18” bolts.  The Full Width End Caps are about 15-1/2” long and will fit with either of our Modular Front Bumpers. 

If you have removed your LED Fog Lamps from an OEM Steel Bumper, then you will need to purchase these brackets to reinstall the fog lamps into our Summit Series Front Bumpers.  The LED fog lamps from the OEM steel bumpers have completely different housings and will need to be modified to fit, however our specially designed brackets allow you to cleanly reinstall the fog lamps directly into the bumper.  The plastic light housing modification is simple and can be done with a band saw, sander or a cutting tool.

This air dam skid plate is specifically designed to fit with the JL Summit Modular Front Bumpers with a Recessed Winch Mount.  Because the recessed winch mount bumper (P/n 600.100.120) does not have the ability to mount any factory fog lights, we’ve given the option to add them into this air dam skid plate.  Featuring a sleek finished look, this air dam skid plate is a great way to cover up the factory frame brackets and provide a bit more protection while offroading.

This Winch Guard & Light Bar is specifically designed to fit onto our Summit Modular Front Bumpers.  These bars will attach to the top of the bumper using the supplied 3/8-16 Stainless Steel Button Head Cap Screws.  The bars are made using 1-3/4” Diameter x 1/8” Wall Thick Steel Tubing.  They are CNC formed and welded solid to 3/16” thick base plates.  All our Winch Guard/Light Bars come with plastic push in wire tie clips.  These allow you to fasten your aftermarket lighting wires along the backside of tube ins

Looking to add a little more style and protection to your Summit Modular Front Stubby Bumper?  We’ve designed the Mid Width bumper end caps to be bolted on at any time.  They are made with 3/16” steel and are connected to the bumper using four 5/16-18” bolts.  The Mid Width End Caps are about 12” long and will fit with either of our Modular Front Bumpers. 

This newly designed front bumper for the JL Wrangler & JT Gladiator gives you the option to build your bumper package just as you like it.  Start with the base stubby bumper with top or recessed mounted winch, then add on the winch guard/light bar, end caps and air dam skid plate.  Mix and match however you like. 

This air dam skid plate is specifically designed to fit with the JL Summit Modular Front Bumpers.  Featuring a sleek finished look, this air dam skid plate is a great way to cover up the factory frame brackets and provide a bit more protection while offroading. This is designed to be completely bolt on with no drilling or modification to the frame in any way. 

This newly designed front bumper for the JL and JLU Jeep Wranglers gives you the option to build your bumper package just as you like it.  Start with the base stubby bumper with top or recessed mounted winch, then add on the winch guard/light bar, end caps and air dam skid plate.  Mix and match however you like. 

This JK Standard Rear Bumper, P/n 400.200.110, has a very light scratch in the powder coat as shown in the photo.  The scratch isn’t down to bare metal and isn’t extremely noticeable, but it’s enough we wouldn’t want to sell as perfect.  The rear bumper will come packed in original new packaging and includes all necessary hardware, brackets and installation instructions.  As with all scratch and dent parts there is no warranty.  Free shipping is not offered for scratch and dent products. 

Our Canyon series stubby rear bumper is designed with the minimalist in mind that doesn’t want to settle for the common bland styling of most stubby rear bumpers.  This is an extremely compact design that hugs the rear frame crossmember tightly but does NOT require any frame cutting.  It doesn’t just look great; it’s functional, easy to install and tough as nails. It’s fabricated using USA Grade 3/16” Steel Plate, laser cut, CNC formed, robotically welded, and hand metal finished.