Jeep JL & JT Summit Recessed Winch Modular Front Bumper

SKU: 600.100.120
Weight: 58 lb
Dimensions: 46 in × 14 in × 10 in

All JL & JT Model Years

Installation Time: 

2-3 Hours


1 Year limited Warranty

This newly designed front bumper for the JL Wrangler & JT Gladiator gives you the option to build your bumper package just as you like it.  Start with the base stubby bumper with top or recessed mounted winch, then add on the winch guard/light bar, end caps and air dam skid plate.  Mix and match however you like. 

As with all Hyline Offroad products these are designed and built with superior durability and longevity in mind.  We put all bumpers and accessories through a rigorous finishing process that includes an acid rinse for prepping the metal, then E-Coated that acts as a complete sealing primer and finally a topcoat using an automotive grade powder coat.  The powder topcoat is a very light texture semi-gloss that closely matches the OEM black plastic fender flare texture.  Though this is a more expensive process it ensures your purchase will last for years to come.


Here’s all the features included with this bumper:

  • 3/16” Steel Construction with 1/4” Plate Mounting Brackets and Stiffeners
  • 5/8” Plate Shackle Mounts (Hole size for 3/4” Shackles)
  • Completely Bolt On Design - No Cutting or Drilling
  • Winch holes for standard 10” x 4.5” bolt pattern
  • Frame Reinforcement Brackets for winch
  • No additional winch or fairlead mounts needed
  • Ready for Optional Winch Guard/Light Bar (Part Number 600.100.150)
  • Ready for Optional Full Width Bumper End Caps (Part Number 600.100.140)
  • Ready for Optional Mid Width Bumper End Caps (Part Number 600.100.130)
  • Ready for Optional Air Dam Skid Plate with Fog Light Mounts (Part Number 600.100.160)
  • All hardware included is 316 Stainless Steel and Super Corrosion Resistant Coated High Strength Steel
  • Prepped (Acid Rinsed), Primed (E-Coated) and Top Coated (Automotive Grade Textured Powder Coat)
  • Proudly Made 100% In USA.



Tools Required: 

Ratchet, 7mm socket, 8mm socket, 16mm socket, 18mm deep socket, 6” extension, 11/16” deep socket, panel fastener removal tool or flat blade screwdriver.

Parts Included: 

Front bumper, winch reinforcement brackets, fully welded D-Ring mounts (3/4” shackles not included), installation instructions and all required mounting hardware.