Jeep JK & JKU Front Inner Fender Liners (2007 to 2018)

SKU: 400.300.140
Weight: 11 lb
Dimensions: 26 in × 20 in × 10 in

All JK Model Years

Installation Time: 

3 Hours


1 Year Limited Warranty

With the release of the new JK inner fender liners, Hyline Offroad continues their legacy in underhood heat management by incorporating a heat extraction vent panel into the liners. The added benefits don’t stop there. The liners are made out of series 5052 aluminum and all hardware is stainless steel to help ensure a rust free life span. The inner fender liners are also designed with tire clearance in mind. The three piece design allows for a panel that tightly hugs the components of the engine bay to achieve maximum tire articulation. You’ll have plenty of clearance for aftermarket bump stops that sit on top of the coil spring perch and, with minor modification, clearance for some coilovers. They also provide for control over the look you want by offering either a raw aluminum set or the option of fine textured black powder coat. The perforated mesh panel is left as raw aluminum on both versions so you can paint to color match or leave it bare aluminum. Lastly these fender liners include an industry first panel that covers the inner fender body gap. They also work with factory fenders and many aftermarket fenders, including Bushwacker flat fenders. The combination of these features with the legendary Hyline made in America quality make these a great addition to any Jeep JK or JKU.

NOTE: Hyline Offroad has designed these fender liners to allow for fitment with most aftermarket plastic and steel fender flares.  The Hyline Offroad fender liners have been successfully tested and installed on a number of aftermarket fender flares.  You may however, have to modify either your fender flares or the fender liner slightly in order to fit with your specific accessories and application. 


Tools Required: 

(Ratchet, 10mm, 3/8” & 7/16” Sockets), (7/16” Wrench), (1/8”, 5/32” & 3/16” Allen Wrench), (Drill & 9/32” Bit)

Parts Included: 

3 drivers side panels, 3 passenger side panels, 2 metal mesh inserts and all necessary hardware.