Jeep JK Scratch & Dent Front Crawler Bumper

SKU: SD400.100.190.A
Weight: 71 lb
Dimensions: 53 in × 15 in × 11 in

All JK Model Series 2007 - Present Jeeps

Installation Time: 

1 1/2 Hours


There is no Warranty on Scratch & Dent Items


This JK Crawler Front Bumper with Recessed Winch, P/n 400.100.190, was damaged slightly during shipment.  There are some scuffs through the powder coat on the shackle mount and winch delete plate as shown in the photos.  If you’re planning on installing a winch, then the winch delete plate isn’t used anyway.  These areas could just be touched up using spray paint if desired.  The bumper will come packed in original new packaging and includes all necessary hardware, brackets and installation instructions.  As with all scratch and dent parts there is no finish warranty.  Free shipping is not offered for scratch and dent products.

Tools Required: 

Ratchet, 18mm deep socket, 6" extension, 11/16" deep socket, 5/8" socket, 11/32" deep socket, Torque wrench, 5/8" wrench and phillips screwdriver.

Parts Included: 

Front bumper, winch mount plate, fully welded D-Ring mounts (3/4" shackles with 7/8" pins not included) mounting brackets and all required Grade 8 mounting hardware.